Hello, I’m sending the same request with K6 and receive data was really differs from each other.
The issue is connected with “Iterations count”
For the first request i get the iterations count as 3500 and after the second request (1sec later) I see the iterations count 8900. The difference was really big, so I want to understand what can matter to following issue.
The response bodes see above
-
✓ status is OK
checks…: 100.00% ✓ 3551 ✗ 0
data_received…: 6.4 MB 128 kB/s
data_sent…: 2.3 MB 47 kB/s
grpc_req_duration…: avg=165.86ms min=14.37ms med=130.42ms max=1.7s p(90)=236.11ms p(95)=305.44ms
iteration_duration…: avg=284.86ms min=89.31ms med=243.47ms max=1.86s p(90)=376.89ms p(95)=502.23ms
iterations…: 3551 71.005159/s
vus…: 100 min=100 max=100
vus_max…: 100 min=100 max=100 -
✓ status is OK
checks…: 100.00% ✓ 8966 ✗ 0
data_received…: 16 MB 787 kB/s
data_sent…: 5.8 MB 286 kB/s
grpc_req_duration…: avg=112.64ms min=15.39ms med=110.23ms max=283.36ms p(90)=159.93ms p(95)=179.07ms
iteration_duration…: avg=224.34ms min=85.26ms med=219.9ms max=421.3ms p(90)=276.6ms p(95)=300.01ms
iterations…: 8966 443.620645/s
vus…: 100 min=100 max=100
vus_max…: 100 min